Enter zip code:



 

Support

Customer Service: 800.255.5766 Voice: 501.771.4477 Fax: 501.771.2333 Email Us

Signature Air-Whirlpool

SIGNATURE AIR-WHIRLPOOL


ELECTRONIC CONTROL
All functions of the Air-Whirlpool bath can be conveniently operated with Jason's Air-Whirlpool digital touchpad which controls the operation of the three speed whirlpool pump, the air blower, the underwater mood light, and the optional jetted neck pillow.

WHIRLPOOL ON/OFF (PUMP ICON)
To control the operation of the whirlpool pump motor, press and hold for each setting, On or Off. A 20 minute decreasing timer will be initiated when the pump motor starts. Press and release the Pump icon once to display the current pump setting. The Pump icon lights when the water is at operating level and the LCD displays "System Ready". The LCD will display "Pump Off", when the key is pressed. It also toggles between Temperature and Timer at 5 second intervals. "Low Water" is displayed if no water is detected (displays for 5 seconds).

BLOWER ON/OFF AND MODES (BLOWER ICON)
To control the operation of the blower, simply press and hold the key to change the setting to Constant, Wave, Pulse, or Off. A 20 minute decreasing timer will be initiated when the blower motor starts. Press and release the Blower icon once to display the current blower mode and speed. The Blower icon should remain lit as long as the bath is connected to a power supply. The LCD will display "Const Air" and blower speed, "Wave Air" and blower speed, or "Pulse Air" and blower speed, while the key is pressed. The time remaining on the purge cycle is displayed after the bath has drained. "Purge Stop" is displayed while the key is pressed during the purge cycle. This action will terminate the purge cycle. The mode settings will be remembered on the next startup.

JETTED NECK PILLOW ("P" ICON)
To control the operation of the jetted neck pillow, press and hold for each setting, you can set for a constant flow on both jets, a pulsing flow on both jets, or a pulsing alternating flow between jets. Press and release the Pillow icon once to display the current pillow setting. The Pillow icon will light whenever the pump is running. The solenoids will open for two (2) minutes to drain during the purge cycle countdown. The LCD will display "Pillow On", "Pillow Pulse1", "Pillow Pulse2", or "Pillow Off" while the key is pressed.

LED LIGHT (LIGHT ICON)
Hold the key for less than two (2) seconds to turn the lights Off or On. Hold the key for more than two (2) seconds to change modes. The Light icon should remain lit as long as the bath is connected to a power supply. This function has a two-hour timer and remembers the last mode. The LCD displays "Light On" or "Light Off" while the key is pressed for less than two (2) seconds; "Light Cycle" is displayed if pressed for more than two (2) seconds.

REMOTE CONTROL
The bath control system includes a waterproof floating universal remote. It controls all bath functions plus TV, DVD, CD, etc. which can be heard through the Sound Immersion Transducers (optional).

CUSTOMIZED SETTINGS
The 12 character LCD display can be customized by pressing the Blower and Blower Speeds icons simultaneously for five (5) seconds, while the system is Off. Note: The Blower Speeds icon will not be illuminated during this process. Use the above figure to locate the icons. A menu will be displayed to choose the following: Purge 24, (starts the blower every 24 hours for two (2) minutes at the same time the purge was set), Product Test Diagnostics, Temperature (F or C), and Language (English or Spanish).

View an interactive demo!

 
MicroSilk® for Your Skin Learn more about how MicroSilk® nourishes and hydrates skin. QUIET DESIGN Enjoy a peaceful bathing experience. Vivere Brochure Our walk in bath collection, featuring MicroSilk®
Jason International, Inc · 8328 MacArthur Drive · North Little Rock, AR 72118 · USA | Customer Service: 800.255.5766 · Voice: 501.771.4477 · Fax: 501.771.2333
©2007 Jason International Inc. All Rights Reserved. | Disclaimer Site Map Contact Us