Jetted Neck Pillow

JETTED NECK PILLOW

To operate Jason’s Jetted Neck Pulse-Pillow, the whirlpool pump must be functioning.

1. To start the jetted neck system, simply press the on/off button.

• Both jets will function simultaneously in the constant mode.

2. To stop the jetted neck system, press the on/off button.

CHOOSING THE SIMULTANEOUS PULSATION MODE

1. Press once and you will be choosing the simultaneous pulsation mode.

• The water flow will pulsate (on/off) at low speed simultaneously through both jets.

2. Press once again for high speed.

3. Press once again to go back to low speed.

CHOOSING THE ALTERNATE PULSATION MODE

To choose the alternate pulsation mode, the jetted neck system must be on.

1. Press once to choose the alternating pulsation mode.

• The water flow will pulsate (on/off) alternating between both jets at low speed.

2. Press once again for high speed.

3. Press once again to go back to low speed.

Note: The pillow system must be turned off to return the jetted neck system to the constant mode. After being turned off, the pillow system will always come on in the constant mode.