The POWER icon will activate the keypad. Once pressed, all available option icons will light WHITE and the POWER icon will light BLUE. Press and hold for two (2) seconds to turn off all equipment and return to Standby Mode.

The MicroSilk® is used to activate the MicroSilk® unit and the 20-minute timer. Once pressed, the microbubble generator will start and the icon will turn BLUE. Pressing the icon again will shut the unit OFF and the icon will turn WHITE. Starting the MicroSilk® unit will turn OFF any other therapy equipment running at the time.

The AirMasseur® icon is used to activate the blower and the 20-minute timer. Constant mode will start with the first press and the icon will turn BLUE. Wave mode will start with the next press, indicated by a slow flash of the icon. Pulse mode will start with the next press, indicated by a rapid flash of the icon. Pressing the icon again will shut the blower OFF and the icon will turn WHITE. Once the system returns to standby mode the icon will flash GREEN to indicate a purge countdown. After twenty (20) minutes the blower will turn on for two (2) minutes to allow the plumbing lines to drain. This will be indicated by the AirMasseur® icon turning solid GREEN. The purge cycle can be canceled by pressing and holding the power button for five (5) seconds.

The Whirlpool Icon is used to activate the Whirlpool pump and the 20-minute timer. Once pressed the whirlpool pump will start and the icon will turn BLUE. Pressing the icon again will shut the pump OFF and the icon will turn WHITE. Starting the Whirlpool pump will turn OFF any other therapy equipment running at that time.

The Pillow icon is used to activate the neck jets when the Jetted Neck Pillow option is ordered. This icon will appear once the Whirlpool pump has been activated. Constant flow from the neck jets will start with the first press and the icon will turn BLUE. Pulse mode will start with the next press, indicated by a slow flash of the icon. Alternating mode will start with the next press, indicated by a rapid flash of the icon. Pressing the icon again will turn the neck jets OFF and the icon will turn WHITE. Once the system returns to Standby moe, this icon will flash GREEN to indicate a purge countdown. After twenty (20) minutes the solenoids will open for two (2) minutes to allow the plumbing lines to drain. This will be indicated by the Pillow icon turning GREEN. This purge cycle can be canceled by pressing and holding the power button for five (5) seconds.

The Speed icon is used to increase or decrease blower speed once the blower is ON. Press and hold the icon to decrease the blower speed until the desired intensity is reached, then release. Press and hold the icon again to increase the blower speed until the desired intensity is reached. The POWER icon will flash red once the high or low speed limit has been reached. The blower will return to the highest speed on any mode change.

The LED icon will operate the Chromatherapy Mood Lighting System. The LED system will operate for 2 hours before turning off. Once pressed the icon will turn blue and the LED lights will begin a SLOW FADE mode between all the colors. A single press of the icon will progress the light to the next mode or color. Press and hold the icon to cycle through the FADE mode, release the icon to choose any custom color.